+86 182 3185 8969
+86 182 3185 8969
Industrial Screening Wire Mesh
Jiushen supplies woven wire mesh for industrial screens used in sizing, grading, sieving and material separation. Our stainless steel, plain steel, aluminum alloy and epoxy-coated mesh can be specified by material, mesh count, wire diameter, aperture, open area, weave and roll dimensions. The mesh is supplied to equipment manufacturers, screen fabricators, processors, distributors and project buyers for mining, aggregates, food, chemical, pharmaceutical, powder, water treatment and general industrial applications.
Request an Industrial Mesh Quote
Supply scope: This page focuses on woven wire mesh material supplied in rolls, custom widths, lengths or slit strips. Jiushen is a wire mesh manufacturer, not a screening-machine manufacturer. Finished hooked, framed or pre-tensioned screen assemblies require drawing review before confirmation.
Industrial screening performance depends on more than mesh count. Particle size, moisture, abrasiveness, temperature, chemical exposure, vibration and cleaning requirements all affect the selection of wire mesh.
Uniform apertures help processors achieve more repeatable sizing and classification results across production batches.
Aggregate, mineral, ceramic and recycled materials can place high mechanical demands on the screening surface and support structure.
Food, chemical, pharmaceutical, water-treatment and high-temperature processes require material and finish compatibility with the working environment.
Open area, aperture geometry, wire diameter and surface condition influence throughput, cleaning and the tendency of particles to block the screen.
Industrial Screening Applications
●Particle sizing for sand, gravel and crushed materials
●Screening surfaces for mineral and aggregate processing
●Material selection based on abrasion, impact and screen load
●Sieving flour, grains, sugar, salt and granular products
●Stainless steel options for cleanability and corrosion resistance
●Opening and surface requirements defined by the process
●Powder classification and particle-size separation
●304 or 316/316L stainless steel for demanding environments
●Mesh, wire diameter and aperture matched to the process
●Screening and separation in water and wastewater processes
●Corrosion resistance considered according to water chemistry
●Custom width and roll supply for downstream fabrication
●Screening powders, pellets, ceramic materials and dry compounds
●Plain steel or stainless steel selected by load and environment
●Weave stability and aperture uniformity reviewed before supply
●Size separation of processed materials and recovered products
●Mesh specification based on material shape and impact level
●Roll, strip and project-specific dimensions available for review
Recommended Wire Mesh Products
The best material depends on the screened product, operating environment, required service life and total project cost.
A preferred option for corrosive, humid, hygienic or cleanability-sensitive screening applications.
●304, 316 and 316L material options
●Plain or twill weave according to specification
●Suitable for food, chemical, pharmaceutical and water-related screening designs
A cost-efficient choice for general industrial screening where rigidity and economical material selection are important.
●Low-carbon steel options including Q195-based mesh
●Suitable for selected dry screening and separation applications
●Coating or corrosion protection should be reviewed for humid environments
A lightweight option for selected screening, ventilation and separation projects where reduced material weight is valuable.
●Lightweight construction
●Corrosion-resistant material option
●Confirm strength, vibration, temperature and abrasion requirements
A coated mesh option for selected industrial environments requiring additional surface protection and stable woven construction.
●Steel, aluminum or stainless steel substrates
●Protective epoxy coating for project-specific conditions
●Confirm coating compatibility with temperature, chemicals and cleaning method
Material Comparison
| Material | Main Advantages | Suitable Project Direction | Important Checks |
| 304 Stainless Steel | Corrosion resistance, cleanability and general industrial versatility | Food, beverage, chemical and general screening | Particle abrasiveness, temperature, opening and cleaning method |
| 316 / 316L Stainless Steel | Higher resistance for more demanding chemical or humid environments | Pharmaceutical, chemical, water-treatment and corrosive processes | Fluid chemistry, temperature, mesh stability and required service life |
| Plain Steel | Rigidity and cost efficiency for selected general-purpose screening | Dry powders, construction materials, aggregates and general industry | Moisture, oxidation, abrasion, impact and required surface protection |
| Aluminum Alloy | Low weight and corrosion resistance | Lightweight screening, ventilation and selected separation projects | Mechanical load, vibration, temperature and forming requirements |
| Epoxy-Coated Mesh | Protective coated surface with a metal woven support structure | Selected industrial screening and protective mesh applications | Coating adhesion, chemical compatibility, abrasion and temperature |
A complete specification helps the supplier match the mesh to the screening machine, process material and downstream fabrication requirements.
| Specification | What to Define | Why It Matters |
| Material and Grade | 304, 316, 316L stainless steel, plain steel, aluminum alloy or coated mesh | Determines corrosion resistance, weight, strength and service suitability |
| Mesh Count | Mesh count or drawing-defined opening | Controls the approximate separation range and screen permeability |
| Wire Diameter | Wire diameter in millimeters or inches | Influences strength, open area, aperture and abrasion resistance |
| Aperture | Nominal opening size and tolerance | Defines the particle-size separation target and opening consistency |
| Open Area | Required percentage or calculated value | Supports throughput planning and helps manage flow resistance |
| Weave Type | Plain weave, twill weave or other project-specific construction | Affects stability, flexibility, aperture uniformity and forming behavior |
| Width and Length | Roll width, roll length, panel size or slit-strip width | Improves equipment utilization and reduces downstream cutting waste |
| Edge or Processing Requirement | Cut edge, selvaged edge, splicing or drawing-specific processing | Ensures the mesh can be handled or integrated into the next process |
| Surface Finish and Packing | Plain, coated, cleaned, protective packaging and labeling | Protects the mesh during storage, shipment and installation |
Jiushen lists stainless steel woven mesh from approximately 1 × 1 to 635 × 635 mesh, depending on wire diameter and construction. Final aperture, tolerance and open-area values should be confirmed by drawing or sample.
Selection Guide
Confirm whether the mesh is used for sizing, grading, scalping, sieving, dewatering or separation.
Share the particle size, moisture, shape, temperature, abrasiveness and expected material load.
Provide the target aperture, mesh count, tolerance, open area or required separation range.
Compare stainless steel, plain steel, aluminum alloy and epoxy-coated options against corrosion, strength, weight and cost.
Specify plain or twill weave, roll width, length, slit size, edge condition and packaging requirements.
Before series production, confirm equipment fit, tension, vibration, cleaning, replacement method and service conditions.
Jiushen manages weaving, inspection, coating, slitting, packaging and order traceability to support repeat industrial wire mesh supply.
●20,000 m² Total factory area
●15,000 m² Production workshop
●100+ Equipment and auxiliary facilities
●2,700 mm Maximum weaving width listed
●8 million m² Annual production capacity
●99%+ Finished-product pass rate listed
●ISO 9001:2015 quality management system
●Raw material inspection using spectrometer, micrometer and tensile testing equipment
●Raw material checks based on listed ASTM standards and customer requirements
●Three-level process inspection during weaving
●Finished-product inspection for mesh count, aperture, width, length, surface and appearance
●Inspection references include ASTM E2016, ASTM E2814 and GB/T 17492 / ISO 9044
●Raw material warehouse and incoming inspection
●Warping and woven mesh production
●In-process inspection and surface review
●Epoxy coating where required by the specification
●Slitting, splicing, packaging and delivery preparation
●Order-based traceability records and packaging labels
Jiushen's current published production information focuses on woven mesh manufacturing and related processing. Finished screen panels, hooks, frames or pre-tensioned assemblies should be quoted only after technical drawing review.
Learn more about our production capacity and quality control system.
Jiushen can review custom material, mesh count, wire diameter, aperture, weave, width, length, coating, slit size, packaging and quantity requirements. A drawing, existing screen sample or equipment specification helps us evaluate the correct mesh structure and supply format.
Define the opening, wire diameter, material, weave, surface finish and dimensions required for your process.
Choose standard rolls, custom roll widths, custom lengths or slit strips according to your downstream production line.
Confirmed specifications, inspection records and traceability information help industrial buyers manage repeat procurement.
Please provide the wire material, aperture size, wire diameter, mesh size, roll or panel dimensions, required quantity, and application. Jiushen can then recommend a suitable specification and prepare a bulk quotation.
Yes. Jiushen supports customized aperture size, wire diameter, mesh count, width, length, material, and finished dimensions to meet different screening and separation requirements.
Jiushen can supply screening wire mesh in different metal materials and specifications according to working conditions such as abrasion, corrosion, temperature, and screening load.
Yes. Samples can be arranged for buyers to check material, aperture accuracy, wire diameter, surface condition, and overall mesh quality before bulk purchasing.
Jiushen controls wire diameter, aperture dimensions, weaving quality, and finished mesh size during production to help maintain consistent screening performance across large-volume orders.
Yes. Jiushen can recommend heavier wire diameters and suitable mesh structures for demanding applications where wear resistance and mechanical strength are important.
Lead time depends on material, specification, quantity, and customization requirements. Standard specifications can generally be arranged faster than specially manufactured mesh.
Jiushen provides export-ready packaging for rolls, sheets, or customized mesh products to reduce deformation and damage during storage and international transportation.
Send Jiushen your screening application and technical requirements. We will review the material, opening, weave, dimensions, finish and supply format for your industrial screening project.
Copyright © Hebei Jiushen Wire Weaving Co., Ltd. All Rights Reserved. |
Sitemap
| Technical Support:
